Renewable Design for Forklift Rack - Heavy Duty Beam Racking – Dilong

Beam racking is also known as pallet racking, is the most widely used rack, which has advantages of stable structure, high loading capacity and convenient picking up. Beam racking can flexibly equipped with some safety or convenience components, such as support bar, rear support bar of pallet, wire-mesh laminate, anti-collision protector and connecting beam, etc. For its unique cargo management capabilities and extremely convenient pack-up function, beam racking has become the first choice of logistics companies and other enterprises.

Color: gray,blue,army green. orange.
Loading Capacity:Maximum layer loading over 3000 kgs.
Specification:Customized by site and purpose.
Structure Stabilization， convenient picking up.
Flexible equip with  safety and convenience components.
Widely used, is the preferred equipment for logistics storage enterprises.
Upright specificaiton: 80/90/100mm,
Step:  75mm
Loading Capacity:  1000 to 3500kgs / Layer
Heavy duty racking normal operated with pallet.
Access of goods normally by pallet truck or stackers.
Surface treatment:  Shot blasting, powder coating, drying (leveling and curing), packaging.
Colors：Regular colors are grey, royalblue and orrange color.
Features: The beams and uprights are cut-in structure. Layer spaces are adjustable , easy to install and disassemble.
Heavy Duty Beam Racking – Type B (3 Uprights)
Heavy Duty Beam Racking – Type B (3 Uprights）Application:  The shelf length, width and height of racking are big, and the loading per layer is heavy (≥3T).  It can be equipped with steel laminate/plank/pallet according to needs. In order to prevent the forklift truck from hitting the shelf when loading and unloading goods, need to equipe with foot protector and frame protector.

Heavy Duty Beam Racking – Type C (With Secondary Beam)
The features:  The secondary beam is equiped on top of the beam.
Application: Storage of large box packed goods and large moulds. This kind of goods can be directly placed on the secondary beam, reduce the cost of pallet and the racking cost.
For the shelf is high and the loading per layer is heavy, it can prevent the goods falling off when the forklift truck fails to place the goods accurately on the beam .

Heavy Duty Beam Racking is a simple, convenient storage racking among the racking systems, The goods can be accessed by each pallet, the investment cost is also economical. Heavy duty racking, also known as beam racking or pallet racking, are generally stored in pallet units. It is applicable to all kinds of warehouses. It is wildly used racking system. Each pallet of goods can be 100% individul access, quick and easy circulation. The beam height can be adjusted, and the number of layers can be increased according to the actual needs. It is very flexible.  Goods can be accessed by forklift and stackers.

Upright Design of Heavy duty beam racking
The uprights of the heavy-duty rakcing bear the full load of the whole racking system. The effective transfer of load from beam to upright is crucial to the strength and safety of the whole rack system. The hexagonal hole in the front of the upright can transfer the load from the beam vertically to the upright, avoiding the lateral pressure of the beam pendant on the upright.  At the same time the beam pendant will not be stuck , deformation; The cross section of the upright is specially designed to ensure that no torsion, deformation, stress concentration and other phenomena occur when the upright is stressed.

Foot Design of Heaby Duty Racking
1.To bear and transfer the load on the upright and spread the load on the ground.
2.Provide a stable bearing surface for the uprights.
3.The racking is fixed on the ground through the footing.
4. When the ground is uneven, can adjust the flatness by pad.

Hangers and safety pin Design of heavy duty racking
The pendant is designed in the concept of enhancing the resistance to lateral bending moment, improved the capacity to bear vertical pressure and bending moment.
Each pendant is equiped with safety pins to ensure that the beam is fixed in place in installation and to prevent the beam from falling off when the forklift truck hits it abnormally.

Box Beam Design of heavy duty racking:
The box beam is welded by two C style steel buckled. The surface of the beam is reinforced with multiple ribs, which greatly strengthened the loading capacity of the beam.
Application of heavy-duty racking:  Applicable for storing all kinds of goods, for industrial enterprises warehouse and large logistics warehouse.